Tap your machine.
We draw its basket to scale, give the tamper size that fits, and link the descaling and cleaning steps for that model.
The chart
| Machine | Basket | Tamper | Distributor | How-tos |
|---|---|---|---|---|
| Breville Barista Express | 54 mm | 53–53.5 mm | 53 mm | Descale · Clean |
| Breville Barista Pro | 54 mm | 53–53.5 mm | 53 mm | Descale · Clean |
| Breville Bambino | 54 mm | 53–53.5 mm | 53 mm | Descale · Clean |
| Breville Bambino Plus | 54 mm | 53–53.5 mm | 53 mm | Descale · Clean |
| Breville Barista Touch | 54 mm | 53–53.5 mm | 53 mm | Descale · Clean |
| Breville Dual Boiler | 58 mm | 58–58.5 mm | 58 mm | Descale · Clean |
| Breville Oracle | 58 mm | Built in (58 mm) | 58 mm | Descale · Clean |
| De'Longhi Dedica | 51 mm | 50.5–51 mm | 51 mm | Descale · Clean |
| De'Longhi La Specialista | 51 mm | 50.5–51 mm | 51 mm | Descale · Clean |
| Gaggia Classic | 58 mm | 58–58.5 mm | 58 mm | Descale · Clean |
| Rancilio Silvia | 58 mm | 58 mm | 58 mm | Descale · Clean |
| Any E61 machine | 58 mm | 58–58.5 mm | 58 mm | Descale · Clean |
| La Marzocco Linea Micra | 58 mm | 58–58.5 mm | 58 mm | Descale · Clean |
How to measure your basket
- Take the basket out of the portafilter.
- Measure the inside through the centre with calipers, including the depth where the tamper will meet the coffee. Repeat at 90 degrees; a ruler gives only a rough check.
- Match the basket maker's recommendation and allow clearance so the tamper enters and withdraws freely. Do not apply one fixed subtraction to every basket. Too tight can jam; too loose leaves coffee around the edge untamped.
Why the fit matters
A tamper that fits the basket closely presses all the coffee, right to the edge. One that is too small leaves a ring of loose coffee around the outside, and water rushes through that loose ring instead of through the puck. The shot runs fast, tastes sour or thin, and the spent puck shows a dip or a crumbly edge. A tamper that is too large will not go in, or jams in a tapered basket. The right size is the cheapest improvement most home baristas can make.
The three common sizes
- 51 mm suits compact home machines such as the De'Longhi Dedica and many entry-level pump machines. Accessories are easy to find but the range is smaller.
- 54 mm is the Breville size for most of its home machines, including the Barista Express, Barista Pro and Bambino. A 54mm tamper for these machines is usually sold as 53 to 53.5 mm, allowing a little clearance.
- 58 mm is the commercial standard, used by café machines, E61 home machines and Breville's Dual Boiler and Oracle range. It has the widest choice of tampers, baskets and tools.
Some machines use less common sizes, such as 57 mm. Check the chart, and measure if your machine is not listed.
Kinds of tamper
| Type | What it does | Who it suits |
|---|---|---|
| Flat base | The classic shape; presses a flat puck | Most baristas, any machine |
| Convex base | Slightly domed; pushes coffee towards the edge | Some prefer it for older baskets |
| Calibrated or spring | Clicks or stops at a set force | Learners, shared cafés |
| Self-levelling (palm) | Sits on the basket rim and presses level every time | Home baristas, anyone who tamps unevenly |
| Automatic | A machine tamps for you | Busy cafés; see the automatic tamper guide |
The tamper that comes free with most home machines is plastic and slightly undersized; a stainless tamper in the exact size is a cheap, noticeable upgrade.
Precision baskets and 58.5 mm
Some aftermarket precision baskets for 58 mm machines are made with straighter walls and tighter tolerances, so a 58.5 mm tamper fits them more snugly than a standard 58 mm. If you buy a precision basket, check its maker's recommended tamper size, because a 58.5 mm tamper can jam in a standard tapered 58 mm basket.
Tamping well, whatever the size
- Dose and distribute the coffee evenly first; the tamp cannot fix a lopsided bed.
- Rest the portafilter on a flat, firm surface or a tamping mat, not on its spouts.
- Hold the tamper like a torch, with your wrist straight and your elbow above it.
- Press straight down until the coffee stops compressing. Firm and consistent matters more than an exact force.
- Check it is level, lift the tamper straight up, and wipe any coffee off the basket rim before locking in.
Buying a tamper online
When you shop, search by the basket size, not only the machine name, and read the stated base diameter; a listing for a 54mm tamper may carry a 53 mm base, which is correct. Check whether the base unscrews from the handle so you can change sizes if you change machines. A heavier handle helps some people tamp level, but comfort in your hand matters more than weight.
Pressurised and single-wall baskets
Many home machines come with two kinds of basket. A pressurised (dual-wall) basket has a single small hole underneath and makes a crema-like foam even from pre-ground coffee; tamping matters little with it. A single-wall basket has many holes and relies on your grind and tamp to build resistance; this is where a correctly sized tamper makes the biggest difference. Both kinds share the same nominal size for a machine, so the same tamper fits both, but if you only ever use the pressurised basket, a premium tamper will change little in the cup.
Signs your tamper is the wrong size
- A visible ring of loose grounds around the edge after tamping.
- The tamper wobbles from side to side inside the basket.
- Spent pucks have a crumbly edge or a dip near the wall.
- The tamper has to be forced in, or scrapes the basket wall.
- Shots run unevenly on a bottomless portafilter, with spurts from the edge.
If you see these, measure the basket as described above, check the chart for your machine, and buy a tamper in the size the basket maker recommends.
Distributors and puck screens
Distribution tools (the spinning "leveller" discs) and puck screens are sized the same way. A 58 mm distributor suits a standard 58 mm basket; some are made at 58.5 mm for precision baskets. On a 54 mm Breville, choose 53 mm tools.
Common questions
What size tamper for a Breville Barista Express?
The Barista Express and Express Impress use a 54 mm basket. Look for a 53 to 53.5 mm tamper.
What size tamper for a De'Longhi Dedica?
The Dedica uses a 51 mm basket. Look for a 50.5 to 51 mm tamper.
Is 58 mm the standard portafilter size?
Yes. 58 mm is the commercial standard used by most café machines and E61 home machines, so the widest range of accessories is made for it.
What size is a Breville portafilter?
Most Breville home machines (Barista Express, Pro, Touch, Bambino) use 54 mm. The Dual Boiler and the Oracle range use 58 mm.
Does a 54mm tamper fit a 54 mm basket?
Usually a tamper sold for 54 mm baskets has a base of about 53 to 53.5 mm, leaving clearance to go in and out. Check the stated base diameter, not only the label.
Can I use a 58 mm tamper on a 58 mm precision basket?
Yes, though a 58.5 mm tamper fits many precision baskets more closely. Check the basket maker's recommendation first.
Do I need a new tamper if I change machines?
Only if the basket size changes. Tampers with a screw-off base let you swap just the base.


